Utilitech #PPLSP100-SS Instruction Manual page 7

INSTALLATION INSTRUCTIONS
2. Positioning the Hose Adapters
a. Wrap threads of discharge tee (sold separately
Item #0071492) with thread tape.
b. Thread a 1 in. discharge tee (2) into the outlet of
the pump.
c. Thread hose adapters (B) into pump outlet and
into the discharge tee (2).
Note: Discharge tee is optional.
CAUTION: All connections must be air tight. A single
leak will prevent proper operation of the pump and may
cause the pump to run dry. This will void the warranty.
3. Installing the Pump:
a. Connect a 3/4 in. heavy duty garden hose
(sold separately) to the pump inlet (1). The inlet
connection can also be used with 1 in. PVC pipe.
(Note: If you are using a PVC pipe, you will need
a 1 in. male NPT X slip adapter.)
Notice: The inlet hose must be a reinforced type when
pumping from lakes, ponds, or small streams. A regular
garden hose will collapse and lead to pump failure.
Note: A foot valve MUST be used to maintain prime
during operation. Foot valves are sold separately (Items
#0023581, #0109080, and #0025528).
b. Connect an outlet pipe or 3/4 in. standard garden
hose (sold separately) to the discharge tee (2).
The outlet connection is designed for a 1 in. NPT
thread. Rigid pipes such as PVC or a garden hose
may be used.
2
2
B
3
2
1
7
B
Lowes.com