Advertisement
Quick Links
Download this manual
See also:
Operating Instructions
Dismounting the unit
Insert the supplied tool 8 between the unit and the frame, and rotate 90º to release the
1
hidden mounting spring. Repeat on the opposite side and remove the frame.
8
10mm
90°
2
Insert a flathead screwdriver between the bracket and mounting spring. Gently pry the
spring toward the unit while pulling the unit out a little. Repeat on the opposite side and
remove the unit.
8
4mm
FM/MW/SW
Cassette
Car Stereo
Installation/Connections
öO u «ØVO d «
XR-1780
Sony Corporation 2000
Parts list
The numbers in the list are keyed to those in the instructions.
1
2
4
5
7
8
Caution
Cautionary notice for handling the bracket 1.
Handle the bracket carefully to avoid injuring your fingers.
1
Note
The tool 8 is used for removing the unit.
Be sure to keep it for future use.
3-866-438-51 (1)
Printed in Malaysia
3
6
× 2
1
8
× 4
Advertisement
Related Manuals for Sony XR-1780
Summary of Contents for Sony XR-1780
- Page 1 Repeat on the opposite side and remove the unit. XR-1780 Sony Corporation 2000 Printed in Malaysia Parts list The numbers in the list are keyed to those in the instructions.
- Page 2 Fire wall Dashboard Mounting the unit in a Japanese car You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your nearest Sony dealer. TOYOTA NISSAN to dashboard/center console to dashboard/center console max.
- Page 3 • •Run all earth wires to a common earth point. • •Be sure to insulate any loose unconnected wires with electrical tape for safety. Connection diagram Front speakers XR-1780 Rear speakers...
-
Page 4: Connection Example
Connection example XR-1780 Fuse (10 A) to the +12 V power terminal which is energized in the accessory position of the ignition key switch from a car aerial Be sure to connect the black earth lead to it first. to the +12 V power terminal which is energized at all times Be sure to connect the black earth lead first.