Airspeed; Units - Kanardia EMSIS User And Installation Manual

EMSIS – User's and Installation Manual
Select the option and use up/down buttons to adjust the brightness. Note, EMSIS always starts with
maximal brightness.

6.5 Airspeed

The Airspeed configuration is accessible by selecting the Airspeed option
window shown on Figure 21 opens.
Change can be done for five scale limits as seen on Figure 22:
1. Low – is the beginning of the scale. The scale shows nothing until the aircraft exceeds this speed
limit – only numerical value is seen.
2. Yellow1 – to this limit the range is yellow. Yellow1 range is optional.
3. Green – the maximum value for the green range. Green range is the normal range of the operating
speeds for the aircraft.
4. Yellow2 – to this limit the range is yellow. The second yellow range is the range, in which the
aircraft may be operated in smooth air, and then only with caution to avoid abrupt control
movement.
5. Red – to this limit the range is red – also the end of the scale. Beginning of the red range indicates
the maximum demonstrated safe airspeed that aircraft must not exceed under any circumstances
(V ).
NE

6.6 Units

Units configuration is accessible by selecting the Units option from the Settings page. A window
illustrated on Figure 23 opens.
5Not available for all layouts. Some layouts have predetermined speed ranges.
Figure 21: Airspeed configuration window.
Figure 22: Example of an airspeed scale.
21
5 from the Settings page. A