Dimensions, Weights And Minimum Clearances - Carrier 53QG18-H Installation Manual

4. DIMENSIONS, WEIGHTS AND MINIMUM CLEARANCES

4-1 OUTDOOR UNITS
38QG SERIES
DIMENSIONS (mm)
Kg
Weight
Model Kg
38QG18 52.8
38QG24 58.5
MINIMUM CLEARANCES FOR FREE AIR CIRCULATION, SERVICE AND MAINTENANCE
Notes:
- The front of the condensing unit (Propeller discharge airside) should be free from obstructions.
Any obstruction should be away from front of the condensing unit with distance specified in the
following drawings.
- The back of the condensing unit (coil intake airside) should be at least 160 mm away from any
obstruction. This distance 160 mm A is built-in design of wall support.
- A free space should be left on the right side of the outdoor unit.
- A free space should be left on the side of the refrigerant connections of condensing unit to ensure
easy access to the terminal block.
- A free space should be left from the top cover of condensing unit to ensure easy access to electrical
components, motor and propeller.
- The refrigerant line connections must be conveniently located for service and maintenance.
860
665
665
3
350
384