Table of Contents
Advertisement
8.2
Adjusting the running wheels
If the machine only sands on one side, the surface setting must be adjusted. Following
replacement of the sanding drum or running wheels, the surface setting must always be newly
adjusted. To make a level, uniform setting, the sanding drum and the running wheels must rest
on the same plane. The right running wheel is adjustable. The left wheel does not adjust.
Instructions:
1. Turn the machine off.
2. Disconnect the machine from the mains power.
3. Lay the machine on its left side.
4. With the running wheel adjustment device determine the position of the left running wheel.
5. Loosen the cam fixation bolt on the running wheel bracket next to the right running wheel.
32
05/2011
Advertisement
Table of Contents
