Makita BTD133 Technical Information page 9

C
ircuit diagram
Fig. D-1
Bundling
tape
Note: When Stator or Controller is necessary to be replaced, Stator set and Controller set are available.
Cut the lead wires between Stator and Controller, and then connect Stator set/Controller set with
the cutting ends of the lead wires. Refer to Fig. D-2.
Stator unit (enclosed by a dot line) is also available.
Color index of lead wires' sheath
Black
White
Red
Yellow
Stator
Fuse
Orange
Blue
Gray
Terminal of Switch
Switch
Connector
of LED
Connector of
Controller for
LED
Controller
Stator unit
Terminal
P 9/ 10
LED
Circuit
Connector of
Controller for
Switch
Bundling
Tape