Click the [TCP/IP] link on the left and then click [General] to view the
current IP configuration of the Access Point. You can manually enter
new IP info as well in order to easily integrate the unit into your exist-
ing LAN. Then press the [Apply] button to save your changes.
23
Figure 1.4
Figure 1.5
Firmware Update Procedure
Once you have completed the installation procedure outlined in the
[Utility Installation] section of this manual, you can follow the steps
below to run the firmware upgrade utility program.
Click the [Start] button, go to the [Programs] folder and click [EZ
Connect Wireless AP Utility].
Then click the [Firmware Upgrade Utility] icon and you should see the
following appear on your screen:
Figure 1.0
24