Changing Courses - European Touch sogno dreamwave Owner's Manual

Various Adjustments
VIBE OFF Button
The vibration function included in
a program can be canceled with
the VIBE OFF button, according
to your preference. To
reactivate the vibration function,
press the VIBE OFF button
again.
Air Massage Buttons
The intensity of air massage can
be adjusted by area. Each time
the button located behind the
panel of the remote control is
pressed, the intensity changes in
the order of High, air massage
canceled, Low, then Medium.
* Air massage cannot be
canceled for programs that
include stretch motions or
during Full-Body Air
Program. The intensity is
changed in the order of High,
Low, and Medium.
* If the program is changed,
the intensity of air massage
is reset to its initial setting
(MED).
C C
HANGING OURSES
Before the course in progress finishes, you can change it to another course. After a total duration of 30
minutes, the course in progress stops even if not completed.
* It may take some time to change courses because the air bags for the BACK 3-D function must be deflated
before changing the course.
Switching from One Preset Program in Progress to Another
When one Preset Program button is pressed while another Preset Program is in progress, the rollers return to
their storage positions, then the selected program starts from Automatic Shiatsu Point Locator operation.
Switching from a Preset Program to Manual Selection Mode
When one of the buttons for Manual Selection Mode located behind the panel of the remote control is pressed
while a Preset Program is in progress, the Preset Program immediately stops, and the selected operation
starts with the Automatic Shiatsu Point Locator operation. To select an air massage or back vibration
operation, press the POWER button to stop the preset program in progress before the selection.
70080000 Manual Sogno DreamWave Spa
Stopping in the Middle of a Massage
Rev A
BACK 3-D Buttons
The intensity of back massage
can be continuously adjusted
with [+] and [-].
AIR LEVEL Button
The intensity of air massage is
initially set to Medium. Each
time the button is pressed, the
intensity changes in the order of
High, air massage canceled,
Low, then Medium. (The
intensity of air massage for the
Youth Program is initially set to
Low.)
* Air massage cannot be
canceled for programs that
include stretch motions or
during Full-Body Air Program.
The intensity is changed in the
order of High, Low, and
Medium.
* If the program is changed, the
intensity of air massage is
reset to its initial setting (MED).
Back Vibe Button
The intensity of a back vibration
operation can be adjusted with
the Back Vibe button located
behind the panel of the remote
control. The intensity of back
vibration is initially set to High.
(The intensity of the back
vibration operation for the Young
Program is initially set to Low.)
Each time the button is pressed,
the intensity changes in the
order of vibration canceled, Low,
and High.
Revision Date: 25 March 2010 Page 28 of 42