Installing and Setting up the Machine > Default Settings of the Machine
6
Set the subnet mask.
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, which is shown highlighted.
7
Select the [OK] key.
8
[▲] [▼] key > [Default Gateway] > [OK] key
9
Set the default gateway.
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, which is shown highlighted.
10Select the [OK] key.
IMPORTANT
After changing the setting, restart the network from System Menu, or turn the
machine OFF and then ON.
Restart Network (page 8-19)
NOTE
The network can be configured from the computer by using Command Center RX.
Command Center RX User Guide
2-16