Philips ME8 Service Manual page 15

4.3.9 LCD Panel / Lightguide
Refer to next figures for details.
1. Unplug the LVDS connector [1].
Caution: be careful, as this is a very fragile connector!
2. Unplug the connectors [2].
3. Remove the fixation screws [3] from rim.
4. Take the rim from the set.
5. Remove the fixation screws [4] and [5].
6. Lift the subframe from the set.
7. The LCD panel can now be lifted from the front cabinet.
When the Lightguide is defective the entire front cabinet has to
be removed. To do so follow the previous steps to remove the
LCD panel as well as removing the IR LED panel and
Tweeters.
4
3
2
3
2
4.4 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
• While re-assembling, make sure that all cables are placed
and connected in their original position. See figure "Cable
dressing".
• Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.
5
5
5
5
4
Figure 4-15 LCD Panel / Lightguide
Mechanical Instructions
1
4
4
Q528.2E LA 4.
4
4
5
5
2
5
5
4
4
H_17650_104.eps
180108
EN 15