DeWalt DCD932 Original Instructions Manual page 207

The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when
the tool is switched off or when it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
Battery pack
Battery type
Voltage V
DC
Capacity A
h
Weight kg
Charger
Mains voltage V
AC
Battery type
Approx. charging time min
Weight kg
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
DCB140 DCB141 DCB142
Li-Ion Li-Ion Li-Ion
14.4 14.4 14.4
3.0 1.5 4.0
0.53 0.30 0.54
30 45
(1.5 Ah (2.0 Ah
battery packs) battery packs)
10 Amperes, mains
3 Amperes, in plugs
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DCH143, DCH243, DCH253, DCH254
D WALT declares that these products described
E
under Technical Data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-6.
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more
information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D WALT.
E
DCB180 DCB181 DCB182 DCB183
Li-Ion Li-Ion Li-Ion
18 18 18
3.0 1.5 4.0
0.64 0.35 0.61
DCB105
230 V
Li-Ion
55
(3.0 Ah
battery packs) battery packs)
0.49
Denotes risk of electric shock.
Denotes risk of fire.
WALT at the following
E
EN GL IS H
Li-Ion
18
2.0
0.40
70
(4.0 Ah
5