Download
Share
Print this page
DeWalt DCD910 Instruction Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Drill
  5. DCD910
  6. Instruction manual
DeWalt DCD910 Instruction Manual

DeWalt DCD910 Instruction Manual

Heavy-duty 1/2" (13 mm) cordless hammerdrill / drill / drivers
Hide thumbs Also See for DCD910:

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
DCD910, DCD920, DCD940, DCD960 Heavy-Duty 1/2" (13 mm) Cordless Drill/Drivers
DCD930, DCD950, DCD970 Heavy-Duty 1/2" (13 mm) Cordless Hammerdrill/Drill/Drivers

Advertisement

loading

Related Manuals for DeWalt DCD910

Summary of Contents for DeWalt DCD910

  • Page 1 INSTRUCTION MANUAL DCD910, DCD920, DCD940, DCD960 Heavy-Duty 1/2" (13 mm) Cordless Drill/Drivers DCD930, DCD950, DCD970 Heavy-Duty 1/2" (13 mm) Cordless Hammerdrill/Drill/Drivers...
  • Page 2 1) WORK AREA SAFETY Defi nitions: Safety Guidelines a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. The definitions below describe the level of severity for each b) Do not operate power tools in explosive atmospheres, signal word.
  • Page 3 3) PERSONAL SAFETY b) Do not use the power tool if the switch does not turn it a) Stay alert, watch what you are doing and use common on and off. Any power tool that cannot be controlled with the sense when operating a power tool.
  • Page 4 c) When battery pack is not in use, keep it away from hearing loss. Temporary hearing loss or serious ear drum damage other metal objects, like paper clips, coins, keys, nails, may result from high sound levels generated by hammer drilling. screws, or other small metal objects, that can make a •...
  • Page 5 • lead from lead-based paints, min ....minutes or AC ..alternating • crystalline silica from bricks and cement and other masonry or DC ... direct current current products, and ....Class I Construction or AC/DC ...alternating • arsenic and chromium from chemically-treated lumber......
  • Page 6 • NEVER force battery pack into charger. DO NOT modify circuits. So when transporting individual batteries, make sure that the battery pack in any way to fit into a non-compatible battery terminals are protected and well insulated from materials that charger as battery pack may rupture causing serious could contact them and cause a short circuit.
  • Page 7 • Contents of opened battery cells may cause respiratory • Before using charger, read all instructions and cautionary markings irritation. Provide fresh air. If symptoms persist, seek medical on charger, battery pack, and product using battery pack. attention. DANGER: Electrocution hazard. 120 volts are present at charging WARNING: Burn hazard.
  • Page 8 • Do not use an extension cord unless it is absolutely • Do not place any object on top of charger or place the necessary. Use of improper extension cord could result in risk of charger on a soft surface that might block the ventilation slots and result in excessive internal heat.
  • Page 9 3. If the pack is left in the charger after the initial 1-hour charge, the 3. The completion of charge will be indicated by the red light charger will begin the Automatic Tune-Up™ mode. This mode remaining on continuously. The pack is fully charged and may be continues up to 8 hours or until the individual cells in the battery used at this time or left in the charger.
  • Page 10 PROBLEM POWER LINE avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer. Some chargers have a Problem Power Line indicator. When the charger is used with some portable power sources such as 3.
  • Page 11 Storage Recommendations FIG. 2 1. The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold. 2. For long storage, it is recommended to store a fully charged battery pack in a cool dry place out of the charger for optimal results.
  • Page 12 Side handle (H) clamps to the front of the gear case and may be rotated FIG. 3 FIG. 4 FIG. 5 360˚ to permit right- or left-hand use. Side handle must be tightened sufficiently to resist the twisting action of the tool if the accessory binds or stalls.
  • Page 13 HAMMERDRILLING (FIG. 5) FIG. 6 FIG. 7 FIG. 8 CAUTION: When the mode collar is in the drill/hammerdrill mode, the drill will not clutch out regardless of the position of the torque adjustment collar (E). Rotate the mode control collar (F) so the hammer symbol is aligned with the arrow.
  • Page 14 OPERATION 3. Always apply pressure in a straight line with the bit. Use enough pressure to keep the drill bit biting, but do not push hard enough WARNING: To reduce the risk of serious personal injury, to stall the motor or deflect the bit. turn tool off and disconnect tool from power source before 4.
  • Page 15 adjustment collar. Reset the torque adjustment collar (E) to the Cleaning appropriate number setting for the torque desired. WARNING: Blow dirt and dust out of all air vents with clean, dry air 4. Always start with lower torque settings, then advance to higher at least once a week.
  • Page 16 • FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act. View other Power Tools made by DeWalt Tools on our website.

This manual is also suitable for:

Dcd920Dcd940Dcd960Dcd930Dcd950Dcd970