To use the Scanner
Scanner Manual
•
To scan the barcode, there are two scanner programs installed on the device
Scanner
•
M3 ScanTest
-
It is a sample test program. It is only for testing the scanning feature of the device. It can not
be used for business application.
•
ScanEmul
-
It is a program which can be used to output the scanned data on the application.
Word-Pad, Internet Explorer or Business Application)
-
The ScanEmul program must be running if you want to scan barcodes.
Scan Test
•
This program is located under
Flash Disk > Scanner
folder.
(like MS
User Manual
You need to select this tab to
configure Settings.
The Scanned Data will be
displayed here.
It is to trigger the scan beam.
You can also Use 'S' button
on the right side of Device to
trigger it.
71
MM3