3.0 ADDITIONAL INFORMATION
3.1 Fan Module
The IPD4000E fan module is installed vertically to the right of the interface module
slots. It comes pre-installed and should not be removed unless it is being replaced. Fan
functionality is indicated by a FAN LED on your management module (all models): NO
illumination or solid GREEN illumination indicates all fans are currently functioning,
solid AMBER illumination indicates one or more of the four fans are no longer
functioning.
Fan LED
C
AUTION Do not operate the IPD4000E without a fan module or with a fan module that is not functioning properly.
3.2 IPD4000E Interface Capacity
4 interface module slots
1 management module slot
8 RJ21 50-pin female Telco connectors
3.3 Technical Support
3.3.1 Net to Net Technologies' Web Site
The following information can be found at
DSL Distance and Bandwidth Quick Reference Chart
Firmware Downloads (for applicable modules)
IPD4000E Installation Instructions 220-0000097 rev01
IPD4000E FRONT VIEW
MANAGEMENT MODULE
Fan Module
http://www.nettonet.com/support
:
Page 15 of 17