Hpf / Lpf Button - Mackie DC16 Owner's Manual

DC16 Owner's Manual
• HPF Button
This button selects the HPF frequency of all inputs and outputs. High-pass filters are utilized
to cut out low frequencies. The high-pass filter control adjusts the cut-off frequency for the filter.
HPF levels may then be changed by rotating the encoders and turned on [green] or off [gray]
by pushing the encoders below the channel displays. A visual representation may be seen on
the DC16 channel displays and the channel's EQ screens on Master Fader.
The HPF ranges from Off to 700 Hz (inputs) and Off to 20 kHz (outputs). The incremental adjustments
are dependent on if the selected EQ is modern or vintage.
The HPF button's LED illuminates white when engaged.
Tom
5
HPF
• LPF Button (ALT + HPF)
This button selects the LPF frequency of all outputs. [There are no LPF on inputs]. Low-pass filters are
utilized to cut out high frequencies. The low-pass filter control adjusts the cut-off frequency for the filter.
LPF levels may then be changed by rotating the encoders and turned on [teal] or off [gray]
by pushing the encoders below the channel displays. A visual representation may be seen on
the DC16 channel displays and the outputs' EQ screens on Master Fader.
The LPF ranges from Off to 20 kHz. [There is no LPF on the vintage EQ].
The LPF button's LED illuminates white when engaged.
MON
A3
LPF
Kick S Top
1 2
HPF HPF
FOH MON
LR A1
Hz
800
LPF LPF
S Btm HiHat
3 4
Hz
95
HPF HPF
MON MON
A2 A3
LPF LPF
42
Tom Rack
5 6
HPF HPF
FOH TB MON TB
A4 A5
LPF LPF