Troy-Bilt 13ax60tg766 Fast Start Manual

Place PTO (Blade Engage) Lever
in Off position.
Place Shift Lever in N
(neutral) position.
Fully depress the Brake Pedal.
© 2006 13AX60TG766
IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning, and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
PTO (Blade
Engage) Lever
Parking
Brake
Button
Shift
Lever
Call 1-888-TO-HELP-U
Need Help?
Throttle
Control
Lever
Brake
Pedal
Move Throttle to Choke position.
Ignition
Switch
Insert key and turn to Start position.
Release after engine starts.
Move Throttle to Rabbit (fast) position.
Is the battery connected? Fresh gas in the unit?
See Operator's Manual for additional troubleshooting tips.
Stopping the Unit
Put PTO (blade engage)
lever in the Off position.
Depress brake pedal. Set
parking brake by pushing
Parking Brake button.
Place shift lever in N
(neutral) position.
Turn key counterclockwise to
Stop position and remove.
(1-888-864-3578)
Didn't Start?
778-11141A