Magnavox MDR161V Owner's Manual page 66

Symptom
"Repairing" appears on the TV screen.
Repairing
You need to cancel the repairing process.
Do you want to cancel a repairing
process? When selecting "Yes",
the disc may not be usable.
Yes
No
Repairing
Picture noise appears.
The cassette tape does not play.
Recording does not start after you press
[REC].
The remote control does not function.
The motor rotates even when playback /
recording is stopped.
Remedy
• If there is a power failure or the AC power cord is unplugged during
recording, finalizing, formatting or editing (even after "Repairing" disappears),
a repairing process will begin automatically just after turning the unit On
again.
• It may take several minutes up to about several hours.
• If you intend to cancel the repairing process, press [A] on the front panel,
then select "Yes" and press [OK]. After that, press [A] to take out the
disc. The disc which was cancelled during the repairing process MAY NOT
work.
• Head cleaning for VCR may be necessary. Refer to "Auto head cleaning"
(p.6)
• Adjust tracking control for better picture by pressing [TRACKING K / L]
while you are playing a cassette tape.
• No cassette tape is inserted.
• Make sure the cassette tape has an erase-protection tab when you record
to a cassette tape. If needed, cover the hole with cellophane tape.
• Check if a cassette tape is in this unit.
• The motor may rotate for a duration of approximately 5 minutes for
efficient operation. This is not a malfunction.
– 66 –
EN