Backup Battery Installation - capello CR50 User Manual

backup battery installation

Two (2) 'AAA' size batteries can also be used to power the unit, as well as backup for the clock, alarm time,
preset memories if the AC/DC adapter is disconnected or there is a power failure.
Open the battery door by pushing in on the tabs, then removing the door.
Insert two (2) 'AAA' batteries following the correct polarity indicated in the battery compartment.
Replace the battery door back on the compartment.
notes: The batteries are used to backup the clock and alarm times when the AC adaptor is disconnected or there
is a power failure. Alkaline batteries are recommended for the longest playing time.
The battery indicator will appear and flash in the display when there are no batteries or when the batteries are low
and need to be replaced.
When replacing the battery, do not disconnect the AC power adapter otherwise the current time, alarm and station
presets will be erased.
battery precautions when using batteries in this device:
• Warning - Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when installing the batteries as indicated. A reversed battery may cause
damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with
fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
• Do not try to recharge a battery not intended to be recharged - it can overheat and rupture. (Follow battery
manufacturer's directions)