Silencing The Alarm; Disabling The Alarm - capello CR50 User Manual

setting the alarm (con't)
Press the TUNE / SKIP
source to wake you up.
Slide the ALARM 1 switch to the "ON" position to complete the the process and the indicator will stop
flashing and become solid.
notes: Before setting the alarm, make sure that the clock time is set correctly (see "Setting the clock").
To set the radio alarm, first tune to the desired station and adjust the volume (see "Playing the radio").
To set ALARM 2 simply follow the same directions above but use the ALARM 2 button.

silencing the alarm

When the alarm sounds, press the POWER button to silence the alarm.
The ALARM 1 icon will appear on the display, indicating that the alarm is reset and will sound again
in 24 hours.

disabling the alarm

If the alarm is not needed the next day, slide the ALARM 1 switch to the "OFF" position and the
ALARM 1 icon will disappear from the display, indiacting that the alarm is off and will not sound.
To reactivate the alarm next time it is needed, slide the ALARM 1 switch to the "ON" position and
the ALARM 1 icon will appear on the display, then check to make sure the alarm time is correct.
<< >>
or TUNE / SKIP
button to select the BUZZER or FM radio as the alarm