Inside The Box; Ac Power Source; Adjusting The Volume - capello CR50 User Manual

inside the box

CR50 Charge Up alarm clock radio, AC power adapter and user guide.

AC power source

Insert the small end of the AC adaptor into the DC In Jack
(located on the rear of the unit). Connect the other end to a
wall outlet providing 100-240V AC, 50/60 Hz.
The output of the provided AC/DC Adaptor is DC 5V 3A.
note: Disconnect both ends of the power cord when not in use.
Use only the supplied AC adaptor with the following specs:
AC In - 100-240V AC, 50/60Hz / DC Out - 5V 3A

adjusting the volume

Press the VOL + or VOL – button repeatedly to increase or decrease the volume to a safe listening level.
AC outlet
AC/DC adapter plug