Setting Clock And Date/Alarm; Setting The Clock And Date; Setting The Alarm - capello CR50 User Manual

setting the clock and date

Plug in the CR50 Charge Up but leave the power 'OFF'.
Press and hold the TIME SET button until the display flashes "12" then press the TUNE / SKIP
>>
TUNE / SKIP
button repeatedly to advance to the correct current hour.
Press the TIME SET button to confirm and now the digits "00" will begin flashing. Pressing the TUNE /
<<
SKIP or TUNE / SKIP
When you reach the correct current minute, press the TIME SET button again to confirm.
Four digits which display the year will begin flashing below the time. Press the TUNE / SKIP
>>
or TUNE / SKIP
button repeatedly to advance to the correct current year.
Press TIME SET button to confirm the current year and the display will begin flashing "1/1". Press the
<<
TUNE / SKIP or TUNE / SKIP
Press TIME SET button to set the current month then press the TUNE / SKIP
button repeatedly to advance the correct current day then press TIME SET again to confirm.

setting the alarm

Slide the ALARM 1 switch to the "SET" position and the display will begin flashing "12".
Press the TUNE / SKIP
reach the desired alarm hour, press the TIME SET button to confirm.
With ":00" flashing now, press the TUNE / SKIP
the desired alarm minute.
Press the TIME SET button to confirm the alarm setting.
>>
button repeatedly to adjust the minutes.
>>
button repeatedly to advance the correct current month.
<< >>
or TUNE / SKIP
button repeatedly to advance the alarm hour. When you
<< >>
or TUNE / SKIP
button repeatedly until you reach
<<
or
<<
<< >>
or TUNE / SKIP
(continue on next page)