Fabric/Temperature Control - Kenmore 90 Series Electric Owner's Manual And Installation Instructions

FABRIC/TEMPERATURE CONTROL
Proper use of this control helps ensure
that fabrics are dried at the right
temperature for maximum life.
Use this control to select the drying
temperature that matches the fabrics
in your load.
• Select LOW for delicate fabrics.
Select HIGH for durable fabrics such
as sturdy work clothes or bath towels.
• The FABRIC/TEMPERATURE Control
will not work when the Cycle Selector
Control (Timer) is in the Air Dry Cycle.
FABRIC
11_MPfS_AI1JRE
I_JiT / NORMAL /
CASUAL PERM PRE88
MI_IUM klCqUM Hl_dt
The following table lists suggested
dryer settings and drying times for
various loads. This is only a guide.
Settings may require adjustment
depending on the requirements of
your load.
AUTOMATIC Drying TIMED DRY
Type of Load Setting Temp Setting**
COTTONS AND LINENS
Extra Heavy - Bedspreads, mattress MORE DRY HIGH 70-80 min.
pads, quilts
Heavyweight - Towels, jeans, corduroys, MORE DRY HIGH 50-60 min.
work clothes
Medium Weight - Sheets, cotton underwear, NORMAL MEDIUM/HIGH 40-50 min.
diapers DRY or MEDIUM*
Lightweight - Batistes, organdies, lingerie NORMAL DRY LOW 30-40 min.
PERMANENT PRESS, SYNTHETICS AND BLENDS
Heavyweight - Work clothes, jackets, NORMAL HIGH 40-50 min.
raincoats DRY
Medium Weight - Shirts, play clothes, NORMAL MEDIUM/HIGH 30-40 min.
sheets, slacks DRY or MEDIUM*
Lightweight - Lingerie, blouses, dresses LESS DRY MEDIUM or LOW* 20-30 min.
KNITS
Heavyweight - Cotlons, rayons, blends, NORMAL HIGH 40-50 min.
T-shirts, slacks, shirts DRY
Medium Weight - Synthetics (polyester, NORMAL MEDIUM/HIGH 30-40 min.
acrylic, etc.), dress slacks, skirts, sweaters DRY or MEDIUM*
Lightweight - Synthetics (polyester, acrylic, LESS DRY LOW 20-30 min.
etc.) and blends, lingerie, blouses, dresses
*Use the lowest temperature setling available on your dryer.
**Reset time, as needed, to allow items to dry completely.
21