Kyocera FS-3040MFP Service Manual page 7

Item
Photoconductor
Image write system
Charging system
Developing system
Transfer system
Separation system
Cleaning system
Charge erasing system
Fusing system
CPU
Memory Standard
Maximum
Interface
Resolution
Operating Temperature 0 to 32.5 °C/50 to 90.5 °F
environment
Humidity
Altitude
Brightness
Dimensions (W × D× H)
Weight
Floor requirements (W × D)
Power source
Options
a-Si drum (diameter 30 mm)
Semiconductor laser (1 beam)
Contact charger roller method (positive charging)
Mono component dry developing method
Toner replenishing: Automatic from the toner container
Transfer roller (negative-charged)
Small diameter separation, discharger brush (negative-charged)
Counter blade cleaning + cleaning roller
Exposure by eraser lamp (LED)
Heat roller system
Heat source: halogen heater
Abnormally high temperature protection devices: thermostats
PowerPC440 (667MHz)
256MB
768MB
USB: 1 port (Hi-speed USB 2.0)
USB host: 1 port
Ethernet: 1 port (10BASE-T/100BASE-TX)
600×600 dpi
15 to 80%
2,500 m/8,202 ft maximum
1,500 lux maximum
494 × 497.1 × 545.5 mm
19 7/16 × 19 9/16 × 21 1/2
3in1 model (without FAX): Approx. 25.5 kg / 56.2 lbs
4in1 model (with FAX) : Approx. 25.8 kg / 56.9 lbs
Without MP tray: 494 × 497.1 mm
19 7/16 × 19 9/16
With MP tray : 494 × 656.1 mm
19 7/16 × 25 13/16
120 V AC, 60 Hz, more than 10.0 A
220 - 240 V AC, 50/60 Hz, more than 6.0A
Paper feeder × 3, Expanded memory
1-1-2
Specifications
2LW/2LX-1