Table of Contents
Advertisement
Quick Links
Installation and Operating Instructions
7900 series
For use in North America
Morsø 7943
Read this entire manual before you install and use your new room heater. If this room heater is
not properly installed, a house fire may result. To reduce the risk of fire, follow the installation
instructions. Failure to follow instructions may result in property damage, bodily injury, or
even death.
Contact local building officials about restrictions and installation/inspection-requirements
in your area.
Save these instructions
MORSØ JERNSTØBERI A/S . DK-7900 NYKØBING MORS
E-Mail: stoves@morsoe.com · Website: www.morsoe.com
1
A French version of the manual can be downloaded at www.morsona.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Morsø 7943
Summary of Contents for Morsø 7943
- Page 1 7900 series For use in North America Morsø 7943 Read this entire manual before you install and use your new room heater. If this room heater is not properly installed, a house fire may result. To reduce the risk of fire, follow the installation instructions.
-
Page 2: Table Of Contents
We congratulate you on your choice of a Morsø stove. Morsø has been producing some of the world’s best stoves since 1853. If you follow this installation- and operating instruction carefully, we can assure you many years of warmth and pleasure. CONTENTS: Installation of your Morsø... -
Page 3: Installation Of Your Morsø Stove
1.2 The chimney / flue system 1.0 Installation of your Morsø stove Note that the flue system must be independently secured and must not rely on the stove for support. Installation of woodburning stoves must be safe and legal. DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE If your Morsø... -
Page 4: Flue Connection
1.3 Flue Connection The stove is supplied from the factory with a round blanking plate blocking off the top and rear flue exit (behind the rear shield plate). A flue collar are placed in the firebox area. Use a 24 MSG black or blue chimney connector or listed double wall chimney connector. Refer to local codes and the chimney manufacturer’s instructions for precautions required for passing a chimney through a combustible wall or ceiling. -
Page 5: Positioning The Stove
1.5 Positioning the stove FLOOR PROTECTION REQUIREMENTS NON -COMBUSTIBLE MATERIAL BENEATH STOVE Distance to walls and lintel When the stove is positioned near combustible materials, observe all current local and national CANADA building regulations with regards to clearances. Whatever regulations apply to your area, do 8’’... -
Page 6: Positioning The 7970 Stove Model
1.6 Positioning the 7970 stove model (wallmounted) The stove must be installed on a non-combustible wall. A suitable wall would be a brick- or a concrete wall The wall-mounting fixture is provided with four holes for mounting expansion bolts in the wall. The bolts must be sized to secure that the wall and the materials it is made from are capable of supporting the stove. -
Page 7: Lighting And Loading Intervals
Choosing your fuel All types of natural wood can be burned on your stove, but they must be well seasoned and dry. CAUTION: DO NOT BUILD THE FIRE TO CLOSE TO THE GLASS Once the wood is cut to length, it should be split down middle - to suit the dimentions given below -to allowmoisture to evaporate. - Page 8 6. A suitable layer of ember will be formed Do not for any reason attempt to increase the firing of your heater by altering the air control after about 15-20 minutes. adjustment range outlined in these directions. Warning: Fireplace stoves must never be left unattended with the door open. If the door is left partly open, gas and flame may be drawn out of the fireplace stove opening, creating risks from both fire and smoke.
-
Page 9: Maintenance
Door glass replacement. 3.0 MAINTENANCE 1. When you open the door, you will find two hinge pins, one in each hinge. Remove the two When perfoming maintenance on your stove, always protect yourself, using safety goggles hinge pins, lift the door off the hinges and place it face down on a sheet of cardboard or other and gloves. -
Page 10: Cleaning The Stove And The Flue
Gasket Chimney sweeping The gasket around the perimeter of the door may harden over a period of time. It should be Inspect the system regularly during the heating season as part of a regular maintenance schedule. replaced if it becomes difficult to close the doors or if air starts to leak in around the perimeter Establish a routine for the fuel, woodstove and firing technique. -
Page 11: Leaving The Stove For Extended Periods
Important: If the stove is to be left unused for any period of time, clean it out thoroughly and leave the air 7940 Base 7943 Bases 7990 Bases Low/Faible control slightly open to allow airflow. Make sure that the flue does not allow rainwater to come... - Page 12 Screw/Vis Screw/Vis Flue Collar/ Flue Collar/ 73861400 73861400 Collier de serrage tuyau Collier de serrage tuyau Cover/Couvercle Cover/Couvercle P - 44100221 P - 44100221 P - 34790900 P - 34790900 V - 44100221/07 V - 44100221/07 V - 44790921/07 V - 44790921/07 Top plate/Plaque supérieure Top plate/Plaque supérieure P - 34790800...
- Page 13 Option: Option: Top Modules Fresh Air/Air frais Screw/Vis V - 54793321/07 Option: Option: 731612 Draught control/ Top Modules Screw/Vis Réglagetirage Fresh Air/Air frais Washer/ 71790400 73982500 Rondelle Screw/Vis 791891 Screw/Vis V - 54793321/07 Washer/ 73860800 731612 Rondelle 736108 Draught control/ Cover/Couvrir 71790600 Réglagetirage...
Need help?
Do you have a question about the 7943 and is the answer not in the manual?
Questions and answers