Dear SunBriteTV Customer: Congratulations on the ownership of your SunBriteTV all-weather outdoor LCD TV, and welcome to the family of satisfied SunBrite customers. You are in great company, with thousands of homeowners and esteemed commercial facilities such as Yankee Stadium, Fenway Park, Disney World, and Sea World who have trusted us to deliver superior performance, lasting durability and the enjoyment of superb television viewing in the great outdoors.
Power Source: SunBriteTV must operate on a power source indicated on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company. When using the TV outdoors, you must use a GFI- protected AC outlet with “in-use”...
Page 4
However, it is not designed to withstand pressure washers, high-pressure water jets, or hurricane-type weather. Do not service SunBriteTV yourself: Removal of the television screen cover may expose you to high voltage or other dangerous risks. Refer all servicing to a qualified service professional. Warranty will not be honored if you service the unit yourself.
Care of SunBriteTV ......................................53 Caring for the LCD Panel: ............................................53 Appendix ..........................................54 Specifications ................................................56 Features Information and Instructions ......................................59 Programming Other Manufacturers’ Universal Remote Control Devices ..........................59 SunBriteTV Pixel Quality Policy ..........................................59 Extreme Climate Warning ............................................59 SunbriteTV Veranda 4k Operators Manual Page 5...
Supplied Accessories UNPACKING After unpacking the SunBriteTV television, please make sure that the following items are included in the carton and that they are in good condition. If items are damaged or missing, contact your dealer immediately. • SunBriteTV LCD Television •...
LCD panel, and will not cause damage to the screen. Either turn the screen away from the sun, or apply shade to the TV, and the dark areas will quickly disappear. SunbriteTV Veranda 4k Operators Manual Page 7...
TV Installation REAR PANEL INTERNAL CONNECT SOURCE WARNING: Do not connect the power source before making connections. Internal Connect Source through the cable access door. The Internal Connect Source allows you to easily connect to the Audio, Optical, Video, HDMI, and Audio Out. The Internal Connect Source is inside the Cable Cover located on the back of the unit (Figure 1).
From left to right, connect green, blue and red for video, and then connect white for left channel audio, red for right channel audio. Use the Source Button to select Component to view this connection. 9. Cable/Antenna In: This connection is for digital or analog cable via cable box or over-the-airwave antennas. SunbriteTV Veranda 4k Operators Manual Page 9...
Page 10
TV Installation REAR PANEL CONNECTIONS (CONTINUED) CONNECTION DESCRIPTIONS: CABLE DESCRIPTIONS: Port Quality Port Picture Cable Devices that Cable Name Cable Picture & Name Used & use this Port HDMI Resolution Best HDMI HDMI Blu-ray DVD (Digital HD) 2160p,1080p, Player, HD 1080i, 720p, Cable or 720i, 480p,...
Page 11
• The TV’s tuner is designed for HDTV therefore requires a stronger signal than normal TVs. If you cannot achieve that signal level with your antenna or cable, the TV might lose picture or sound. SunbriteTV Veranda 4k Operators Manual Page 11...
TV Installation REAR PANEL CONNECTION DIAGRAMS CONNECTING TO AN ANTENNA (CONTINUED) Connecting to Cable or Antenna through VCR 1. Make sure the power of the TV is turned off. 2. Make sure there is an antenna or cable connection to the VCR already. 3.
Page 13
• This model supports SONY’s universal remote code. If 6. Connect the red color connector to both your set-top box SunBriteTV is not listed, please look up SONY’s codes in and Component 1’s red connector port off the back of your your universal remote’s hand book.
Page 14
TV Installation CONNECTING TO AN EXTERNAL AMPLIFIER OR AMPLIFIED SPEAKERS Connecting with Digital Optical (Best) Connecting with RCA Audio Analog (Good) 1. Make sure the power of the TV and your receiver is turned 1. Make sure the power of the TV and your receiver is off.
This button switches between the different sources of the TV. When the On-Screen Display (OSD) is active, this button acts as the enter button and confirms the menu selection. FRONT PANEL IR Sensor LED power indicator Ambient light sensor SunbriteTV Veranda 4k Operators Manual Page 15...
The functionality of the remote control is under warranty for one year. If the remote control malfunctions within the one-year warranty period, replace the batteries with new long-life alkaline batteries. If the problem is not solved with new batteries, contact the SunBriteTV Customer Care Center. SunBriteTV will repair or replace the remote control at SunBriteTV’s option.
OSD. This button opens the OSD and also exits the OSD by going to the previous level of the OSD. This button exits the OSD entirely. SunbriteTV Veranda 4k Operators Manual Page 17...
Watching TV DISPLAYING AN EXTERNAL EQUIPMENT IMAGE To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. 1. Press INPUT • The input list screen displays 2. Press / to select the input source. •...
Antenna/Cable/Set top box (Cable, Satellite, Disc Player) Press / to select the desired language listed on the screen, and then press enter. Selecting set top box only will bring up the option to skip the TV input. SunbriteTV Veranda 4k Operators Manual Page 19...
Page 20
Watching TV INITIAL INSTALLATION (CONTINUED) Antenna & Cable/STB Select the type of connection you will use to watch TV. 6. Press / to select “Antenna & Cable” or “Set-top box”, and then press ENTER. To watch TV via an antenna or cable connection (without using a set-top box): Select “Antenna &...
Page 21
“Analog Search Start” to search only analog broadcasts, and then press ENTER. • The Channel search will start automatically. • To exit the Channel search screen, select “Cancel”, and then press ENTER. SunbriteTV Veranda 4k Operators Manual Page 21...
Direct Button Operation CHANGING CHANNELS You can change channels in several ways. Method 1 Using CH +/- on the remote control unit or on the TV. Method 2 Using remote control buttons 0-9, - (Dash). Examples: To select a 1 or 2 digit channel number (e.g., Channel 5): Press 5 ENTER To select a 3-digit channel number (e.g., Channel 115):...
Page 23
• Press R (Ch Return) again to switch back to the currently tuned channel. NOTE • R (Ch Return) will not work if no channel has been changed after the TV is turned SunbriteTV Veranda 4k Operators Manual Page 23...
Direct Button Operation AUDIO MTS/SAP stereo mode The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information.
Press SOUND. Current Sound MODE displays. • Press Sound MODE again before the mode displayed on the screen disappears. • The mode changes as shown below: User > Movie > News > User SunbriteTV Veranda 4k Operators Manual Page 25...
Direct Button Operation PICTURE MODE Picture mode gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like ambient light, type of program watched or the type of device connected. You can use USER Mode to create customized settings for each TV input.
Closed Caption services that appear in parentheses will not be stored in the CC button’s memory as your last selected service. Only services that you have selected with the CC button are stored. SunbriteTV Veranda 4k Operators Manual Page 27...
Direct Button Operation CLOSED CAPTIONS AND DIGITAL CLOSED CAPTIONS (CONTINUED) Examples: In a case where there are two closed caption services provided (for instance, Digital CC(ENG) and CC1), and Digital CC(ENG) is displayed as your current selection, if Digital CC(ENG) is not broadcast for the next program, the other closed caption service, CC1, will be displayed in parentheses.
Page 29
Keeps the original aspect ratio in a full Displays an image by an original size. screen display. NOTE • Connect the PC before making adjustments. See the Setup Guide. • Selectable screen size may vary with input signal type. SunbriteTV Veranda 4k Operators Manual Page 29...
Page 30
On-Screen Display Menu INTRODUCTION 1. Item displayed in Orange • This indicates the item currently selected. • Press ENTER to go to the adjustment screen for this item. 2. Item in brackets • This indicates the current setting for the item. 3.
Page 31
• Press / to select a specific adjustment item, and then press ENTER. • Additional related adjustment items may be displayed. Press / to select the desired item. 3. Press MENU to exit. SunbriteTV Veranda 4k Operators Manual Page 31...
On-Screen Display Menu MENU OPERATION BUTTONS Using the remote control Use the following buttons on the remote control to operate the menu. MENU: Press to open or close the menu screen. / : Press to select a desired item on the screen or adjust a selected item. ENTER: Press to go to the next step or complete the setting.
EDID 2.0 is the default and supports full 4k@60hz. EDID 1.4 supports 4k@30hz and should be used when using extenders, older HDMI cables with 4k, or to force a source device to send 4k@30hz. SunbriteTV Veranda 4k Operators Manual Page 33...
On-Screen Display Menu INITIAL SETUP (CONTINUED) ADVANCED Advanced setup and factory reset Digital Audio Setting Set the mode of the Optical Audio out port: OFF/PCM/Bitstream NOTE See advanced settings detail on page 38. Output Select Set the audio level output from the TV: Fixed or Variable See advanced settings detail on page 38.
NC-17: No one 17 and under admitted. X: X is an older rating that is unified with NC-17 but may be encoded in the data of older movies. NOTE • Voluntary movie rating system only uses an age-based rating. SunbriteTV Veranda 4k Operators Manual Page 35...
Page 36
On-Screen Display Menu INITIAL SETUP (CONTINUED) INDIVIDUAL SETUP PARENTAL CONTROL TV Parental Guidelines Suggested age TV-Y: All children. TV-Y7: Directed to older children. TV-G: General audience. TV-PG: Parental Guidance suggested. TV-14: Parents strongly cautioned. TV-MA: Mature audience only. When setting an individual content-based rating item: Press or ENTER to access blocked content items from the currently selected age-based...
Page 37
• Performing any of the three above will activate the V-CHIP BLOCK. Status Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not first configure your secret number. SunbriteTV Veranda 4k Operators Manual Page 37...
On-Screen Display Menu INITIAL SETUP (CONTINUED) ADVANCED SETTINGS DETAIL DIGITAL AUDIO OUTPUT You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected.
Adjust Menu position of the on screen display Closed caption setup. Available on TV input only. Startup Screen Show the startup logo: Yes/No Front Indicator Light Turn on or off the front indicator light. SunbriteTV Veranda 4k Operators Manual Page 39...
On-Screen Display Menu INFORMATION NOTE For operating the on-screen display menu, see pages 33–38. Identification The current version of the TV software is displayed. Digital Caption Info. (Digital Caption Information) This function allows viewing of digital closed caption information for the digital broadcast program being viewed.
Page 41
• “Standard” does not function depending on input signal type. Digital Noise Reduction Produces a clearer video image. AUTO: Automatically adjusts the level of noise reduction. High/Middle/Low: You can select a desired level for viewing a clearer video image. Off: No adjustment. SunbriteTV Veranda 4k Operators Manual Page 41...
On-Screen Display Menu AUDIO SETTINGS You can adjust the sound quality to your preference with the following settings. NOTE For operating the on-screen display menu, see pages 33–38. TV Speakers Internal TV speakers: On/Off. Audio Mode Select the sound mode: User/Movie/News The sound button on the remote will also allow the selection of the various sound modes.
• Do not use a USB extension cable when connecting a USB memory device to the USB terminal on the TV. • Using a USB extension cable with the USB memory device may prevent the TV from performing correctly. SunbriteTV Veranda 4k Operators Manual Page 43...
USB Photo/Music/Video Playback SELECTING THE FOLDERS TO PLAY BACK • To play back data on a USB memory device, insert the USB memory device into the USB ports on the TV. • Use the following procedure to switch back to USB mode after switching from USB mode to another mode.
Page 45
• Progressive format jpeg files are not supported. • Some video file formats may not be played depending on the file or the server. • WMV, ASF, MP4, MOV and AVI are not Home Network contents. SunbriteTV Veranda 4k Operators Manual Page 45...
USB Photo/Music/Video Playback PLAYING BACK FILES ON A USB MEMORY DEVICE NOTE • The screen images in this section are for the USB mode. PHOTO MODE Viewing Thumbnails Buttons for Thumbnail Operations Buttons Description Select a desired item. ENTER When selecting a folder icon: Enter this directory.
• The displayed play time may differ slightly from the actual play time depending on the files. • A few seconds after the cursor is positioned on a thumbnail, the file information is displayed in the right of the center of the screen. SunbriteTV Veranda 4k Operators Manual Page 47...
USB Photo/Music/Video Playback PLAYING BACK FILES ON A USB MEMORY DEVICE (CONTINUED) VIDEO MODE Buttons for Thumbnail Operations Buttons Description Select a desired item. ENTER When selecting a folder icon: Enter this directory. When selecting a video file: Play the video.
• The steps in "LINK Setup" on page 38 need to be completed beforehand. • Refer to this operation manual and the operation manual of the LINK device to be used with this TV. SunbriteTV Veranda 4k Operators Manual Page 49...
Page 50
Using LINK Operation CONTROLLING HDMI EQUIPMENT USING LINK OPERATION (CONTINUE) LINK SETUP Make the settings to use LINK Operation. Set the settings with "Initial Setup" > "Advanced" > "SunBrite LINK Setup". Link Operation Select LINK Operation Control to disable the LINK function even when a LINK-compatible HDMI device is connected to the TV.
The remote control of the TV can be used to operate a portable device. • / , ENTER, EXIT, 0-9, • (DOT), ENT, etc. • The operations vary depending on the connected equipment and content being viewed. SunbriteTV Veranda 4k Operators Manual Page 51...
Troubleshooting The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians. Trouble Solutions No power Check if you pressed POWER on the remote control unit. Is the AC cord disconnected? Has the power been turned on? Unit cannot be operated External influences such as lightning, static electricity, may cause improper operation.
(do not spray the solution directly on the panel) and gently clean the panel. 4. When the TV is not in use, keep it covered with the optional SunBriteTV Outdoor Dust Cover: 5. The fitted dust cover is designed to protect the LCD panel from the harmful UV rays from direct sunlight, and keeps wind-blown objects from scratching the surface of the panel.
Appendix TV STAND - OPTIONAL ACCESSORY Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord. 1. Unfasten the four screws used to secure the stand in place. Example 2. Attach the stand to the TV. If necessary secure the stand to the table surface before attaching to the TV.
Page 55
• The mounting means should be strong enough to bear the weight of the display. • The wall mounting bracket should have UL or related approval. Wall mount Dimensions 4374 200mm x 200mm (A x B) 5574 6574 400mm x 400mm Wall mount Screws SunbriteTV Veranda 4k Operators Manual Page 55...
Specifications SunBriteTV Model SB-4374HD LCD Screen 43-inch diagonal Color Active Matrix TFT LED LCD Resolution 3840 x 2160 UHD 4k Aspect Ratio 16:9 Front View Side View Contrast Ratio 4000:1 Frame Rate 60hz H/V Viewing Angle by 178 Response Time 6.5 milliseconds...
1480mm W x 863mm H x 102mm D TV Weight 51 lbs.(23.1 kgs) Residential Warranty 1 year Commercial Warranty 1 year Vesa Mount Pattern 400mm x 400mm 11.04.2016 Specifications are subject to change. SunbriteTV Veranda 4k Operators Manual Page 57...
Page 58
Specifications SunBriteTV Model SB-6574HD LCD Screen 65-inch diagonal Color Active Matrix TFT LED LCD Resolution 3840 x 2160 UHD 4k Aspect Ratio 16:9 Contrast Ratio 4000:1 Front View Frame Rate 60hz H/V Viewing Angle by 178 Response Time 6.5 milliseconds...
To locate defective pixels, the LCD panel should be examined under normal operating conditions, in its native display resolution, with a 90 degree viewing angle, from a distance of a approximately 20 inches. To qualify for replacement, a defective LCD screen must be reported to SunBriteTV within 60 days from the day the customer receives the TV.
Need help?
Do you have a question about the SB-4374UHD-BL and is the answer not in the manual?
Questions and answers