Assembly And Disassembly Of The Appliance; Usage - Fakir ASSIST Instruction Manual

Assembly and
Disassembly of the
Appliance

Usage

OPERATING
Before assembling and disassembling, make sure your
appliance is switched off.
• Place the bowl on hard and flat surface.
• Position the blade on the spindle of the bowl holding it by
the plastic part.
• Place the on top of the bowl.
• Put the motor unit on top of.
• To disassemble first unplug the motor unit then do the
same in reverse.
Before the first use, clean the bowl with water and washing
up liquid. Rinse and dry with care and reassemble.
Chopping (with the blade):
• Put the ingredients in the bowl. Never exceed the mark in
the bowl.
• To achieve fine and consistent mincing, press the body in
pulses. During preparation, separate the foods at regular
intervals and spread them around the bowl using a
spatula.
The fineness of the finished product will depend on how
long you run the appliance.
WARNING!
Chopper must be run maximum 10 sec.
ATTENTION!
Chopper does not work without the cover.
GB
17