Cisco Nexus 9508 Hardware Installation Manual page 98

10-Gb SFP+ Optical Transceivers and Fabric Extender Transceivers
Transceiver
SFP-H10GB-CU3M
SFP-H10GB-CU5M
SFP-H10GB-ACU7M
SFP-H10GB-ACU10M
For the optical specifications, see the following table.
Transceiver
SFP-100G-LR
SFP-100G-SR
1 The launch power shall be the lesser of the class 1 safety limit or the maximum receive power. Class 1 laser requirements are defined by IEC 60825-1:2001.
For the environmental specifications, see the following table.
Cisco Nexus 9508 Switch Site Preparation and Hardware Installation Guide
88
Cable Type Connector
Type
Twinax cable, —
passive,
30-AWG
cable
assembly
Twinax cable, —
passive,
30-AWG
cable
assembly
Twinax cable, —
active,
30-AWG
cable
assembly
Twinax cable, —
active,
30-AWG
cable
assembly
Transceiver Type Transmit Power
(dBm)
10GBASE-LR, 1310-nm 0.5 (maximum per
SMF lane)
–8.2 (minimum per
lane)
10GBASE-SR, 850-nm –1.2 (maximum per
MMF
lane)
–7.3 (minimum per
lane)
Wavelength Core Size Modal
(nm) (microns) Bandwidth
(MHz-km)
— — —
— — —
— — —
— — —
Receive Power (dBm)
0.5 (maximum per
lane)
–14.4 (minimum per
lane)
0.5 (maximum per
1
lane)
–8.2 (minimum per
lane)
System Specifications
Maximum Cable
Distance
9.8 feet (3 m)
16.4 feet (5 m)
22.8 feet (7 m)
32.5 feet (10 m)
Transmit and
Receive
Wavelength (nm)
1260 to 1355 nm
840 to 860 nm
OL-30837-01