Troubleshooting Guide - Pyle PTCD56UBWD User Manual

Problem
The unit does not
respond (no power)
No sound
The CD player
does not work
Noise or sound
distorted on FM
broadcast
Sound is distorted
Unit becomes warm
after extended play
at high volume.

TROUBLESHOOTING GUIDE

Possible cause
The unit is disconnected from
the AC outlet.
The AC outlet has no power.
Volume not adjusted.
Wrong source selected.
No device installed.
Device not turned ON.
Volume set too low.
Disc is inserted upside down.
Disc is dirty.
Disc is scratched
Disc is warped.
A non-standard disc is inserted
（DVD/ VCD）
Station not tuned properly for
FM.
The FM wire antenna is not
fully extended.
Volume level is set too high.
This is normal.
Solution
Connect to the AC outlet.
Try the unit on another outlet.
Adjust the volume level.
Select the correct source.
Insert a correct device.
Turn ON the device.
Press the Volume + button to turn
the sound level up.
Insert the disc correctly.
Wipe the disc clean with a soft cloth.
Use a new disc.
Use a new disc.
Use a new disc.
Retune the FM broadcast station.
Fully extend the FM wire antenna.
Decrease the volume.
Turn the unit off for some time or
lower the volume.
7