Temperature Controllers - Rinnai infinity 32 HD 250 E User Manual

TEMPERATURE CONTROLLERS

The purpose of the Temperature Controllers is to enable the user to have complete control over the
hot water unit. Used correctly, the hot water unit will supply hot water at the temperature selected,
even when the water flow is varied, or when more than one tap is used. Adjustments to the operation
of your hot water unit can be made with any of the Temperature Controllers. Each Temperature
Controller can be individually programmed.
Various water temperatures (°C) can be selected as follows:
Kitchen Controller:
37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50, 55°C
Bathroom Controller
Hot Water Delivery: 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50°C
Bath fill Delivery: 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48°C
If a temperature between 43°C and 50°C is selected on a Bathroom Controller and this temperature
is then decreased to below 43°C and increased again whilst the water is running, the maximum
selectable temperature will become 43°C. This provides additional safety for the consumer.
Suggested temperatures are:
Kitchen 50°C
Shower 42°C
Bath fill 40°C
These temperatures are suggested starting points for selection. You may find higher or lower
temperatures are more comfortable. Maintaining lower temperatures helps to save energy. To obtain
water temperatures lower than 37°C simply add cold water.
Temperature Controllers are an optional extra. 'Standard' and 'Deluxe Bathfill' Temperature
Controllers can be fitted. Standard Controllers allow temperature selection only. Deluxe Bathfill
Controllers have temperature selection, bath fill and clock functions.
Temperature Controllers allow the temperature to be set from various locations. The temperature
selected will be available to all outlets.
Controller Options
Deluxe Bathfill Temperature
Model
Infinity 26
Infinity 32 MC-70-2A, BC-70-2A,
Infinity 24
Controllers
- 8 -
Standard Temperature Controllers
MC-91-1A