Using The Wireless Speaker - Impecca AS620BT User Manual

USING THE WIRELESS SPEAKER

Once the speakerphone is successfully paired and connected with your mobile phone, you can use it to make
and receive calls. The speakerphone can also be used with voice dialing if your mobile phone supports this
feature. Please check your mobile phone's manual for more information.
Adjust the volume
To adjust the headset volume, press the "Vol+" button to increase or the "Vol-" button to decrease the
volume during a call or while listening to music.
Call handling
1. Using voice dialing:
Short press the MF-button twice, wait for a voice prompt and say the name of the person you
want to call. (Some mobile phones may not support this feature.)
2. Using the phone keys to make calls:
Enter and dial the number on the mobile phone as you normally would. Once the call has
been set up, the sound will be transmitted to the speakerphone automatically.
Redial
To redial the last number, quickly press the Bluetooth button twice.
Answering/Ending/Rejecting calls
When the Wireless Speaker is turned on and there is an incoming call, you will hear a musical
tone or beep (depending on the settings of your phone).
 To answer a call, press the MF (multifunction) button or use the keys on the phone.
 To reject the call, press and hold the multifunction button for about 2 to 3 seconds.
 To end a call, press the multifunction button or use the keys on the phone.
Transferring Calls
During both incoming call and outgoing call state, you can press and hold the Volume +
and - buttons at the same time to transfer the call to the mobile phone. If you want to
transfer the call back to the speakerphone, press and hold the Volume + and - buttons at
the same time again. Some mobile phones may require additional configuration or may not support
this function.
- 7 -