Advertisement
Available languages
Available languages
BASIC OPERATION
Follow these tips and safety instructions to preserve the operational lifespan of your Bluetooth Wireless
Speaker:
Do not use this device in extreme temperatures. Keep away from extreme hot, cold, dry, or damp
areas. Also, keep away from water, fire, and radiation.
It is recommended that you allow the battery to fully charge before using the device for the first time
(approximately 2 to 3 hours. Do not recharge unattended for longer than 5 hours.
The effective range for this wireless device is 10 Meters. Performance may be affected by distance and
interference from other devices or conditions within the operating environment.
Barriers and other wireless devices may affect the performance of this device.
Check the laws and regulations on the use of mobile phones and hands-free equipment in areas you
intend to use this product.
Do not modify, repair or dismantle this Bluetooth® wireless speaker. Doing so may result in fires,
electric shocks, and/or partial or complete malfunction of this device, etc., and will void all warranties.
Do not use any diluents or volatile liquid to clean the Bluetooth® wireless speaker.
Do not allow young children to use this device unsupervised.
Observe all signs and instructions that require an electrical device or radio product to be switched off
in designated areas, such as petrol/refueling stations, hospitals, blasting areas, potentially explosive
atmospheres or aircraft.
Do not use or connect adaptors and/or chargers to this product that are not approved of or specified
by IMPECCA™.
CHARGING THE BATTERY
The Red LED will continually flash when battery power is low. When the battery is completely drained, no
indicator lights will function. Before using, allow the battery to charge fully. When using the micro USB
charging cable from a computer allow 8-10 hours at least. If using the UL adaptor, allow 4-5 hours to fully
charge.
1.
Connect the micro USB cable to the USB Jack on your stereo.
2.
Connect the larger end of the USB cable to a USB port on your PC, laptop, or authorized AC charger
with USB port.
3.
The Red LED will turn on and will steady during charging.
4.
When the battery is fully charged, the Red LED will turn off.
- 5 -
Advertisement
Chapters
