Pioneer f-502 Service Manual page 7

To:
From:
Subject:
Models:
Please discard the previous Service Information SI-PG06003 dated April 21, 2006.
Change: Corrected Service Factory Mode procedure for models PDP433PU and PDP503PU.
Effective immediately, please record the Plasma Panel "Hour" & "P- count" meter readings
on the warranty claim in the Service Performed area. See Warranty Claim Example on page 2.
This applies to Plasma Panels not the Media Receivers and is mandatory for warranty claim
processing.
Accessing the "Hour" & "P- count" meters:
• See Table 1 for current models. This is a summary procedure grouped by
generation.
• For complete procedure or models not listed in Table 1, refer to the service
manual for that model.
Note: Some models have only "Hour" meters.
Thank you for your cooperation and please contact your local Pioneer Office of Technical
Service should you have any questions.
Pioneer Electronics Service, Inc.
Quality Assurance and Factory Service Division
SERVICE
INFORMATION
POLICY GUIDE
All Pioneer Electronics Authorized Service Companies
Quality Assurance and Factory Service Division
Plasma Panel "Hour" & "P- count" meter readings
All Plasma models with "Hour" & "P- count" meters
7
No: SI-PG06003-A
Date: June 26, 2006
(1/4)