Required Equipment - Pioneer f-502 Service Manual

MODEL No.
See to following page
SUBJECT 1 How to remove the coating of SCAN IC.

[ Required equipment ]

[ Procedure ]
PIONEER CORPORATION
K.MATSUMURA ,MANAGER
DP
Technical Support Group
Service Support Division
SERVICE KNOWHOW
Date:
tweezers ( Curved Tip Tweezers are better than stright ones. )
cutting pliers
1. Peel the coating a little at the place of lower left corner
of SCAN IC which has rather more coating.
(Please be careful not to damage the pattern.)
2. Make a notch at the peeled coating.
122
Sep.14, 2004 No.:
MODEL No.
Memo:
Classify:
SKD04003 ( 1/3 )
SY61