Pioneer f-502 Service Manual page 18

Table of Contents

Advertisement

Integrator
mode
G3 PU
n/a
PRO1000HD
1, locked
PRO800HD
PRO1000HDi
1
PRO800HDi
G3 CMX
1
G4 PU
1*
G4 one piece
2 or n/a
G5 PU
1*
G5 SX
10*
*RS232 change only. Disables remote.
1) From standby, push menu, then power.
2) From standby, push display (shows call 1), hold display (shows call 2), menu.
3) From standby, push menu, then set, then power.
4) From standby, push set, then display, then power.
5) From standby, press display, wait 4 seconds; then left, up, left, right, power in sequence.
MR must be connected for PU models.
6) Use digital video for service. Data from RGB loads at power on.
7) Use digital video for service. In factory mode, info layer go to digital EEPROM.
Should be adjust N/G, backup OK. Push set, select data transfer-yes.
Goes to service part; select no. If replacing RGB or MR I/F data updates at power off.
8) Go to initialize layer of factory mode and hold display key until red led goes out.
9) Hold input until LEDs stay lit. Then push down, input, up, power in sequence.
10) Hold the VOLUME up or down key for 3-10 seconds. Then within 3 seconds hold the SPLIT key for 3-10 seconds.
Then within 3 seconds use the ENTER key to set to RS-232C (the baud rate last selected is chosen) or the
HOME MENU key to set to SR+.
3rd generation units that have power supply AXY1059-A to G are being covered for an upgrade to
AXX1064 (AXY1059-H). See bulletin for details. Serial # is on lower edge of front bezel, except for
PRO, which are adjacent to input jacks. An orange dot indicates upgrade is done. Customer
responsible for other repairs.
Pioneer plasma reference
3rd to 5th generation
Factory
Data backup
mode
IC1204 Digital
3 or 4
video
3
6
3
6
3
6
5
7
5
7
5
7
5
7
**Only media receiver has trap.
Power Supply Upgrade
Trap
Trap
indication
override
Red blinks
Enter factory
fast
mode
n/a
n/a
Red/green
9
flash, pause
n/a
n/a
Red and
8
green on
Red and
n/a or 8
green on
Red and
8**
green on
Red and
8
green on
18
PDP display
Media receiver
w/o media
kit
receiver
E01
PDP-R03U-SK
n/a
n/a
n/a
n/a
n/a
n/a
Red & green
PDP-R04U-SK
boxes
PRO-R04U-SK
n/a
n/a
PDP-R05U-SK
Red & green
PRO-R05U-SK
boxes
PDP-AR05U-SK
n/a
n/a

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro-506pu

Table of Contents