Advertisement
5
3
FIGURE 2
STEP 2:
• Insert two 2" SQ. END CAPS (16) into the ends of the BASE (4) as shown in FIGURE 2.
• SECURELY assemble the PAD (5) to the MAIN PAD SUPPORT (3) and BASE (4) using two 3/8" X 2-3/4"
BOLTS (11), two 3/8" LOCK WASHERS (9), two 3/8" WASHERS (8). See FIGURE 2.
17
18
FIGURE 3
STEP 3:
• Apply eight 1-3/4 X 3/4" PARAGLIDES (18) to the INSIDE of the MAIN PAD SUPPORT (3) as shown in
FIGURE 3. (NOTE: Throughly clean the inside surface before attaching PARAGLIDES.)
• Securely assemb1e one SPRING PIN ASSEMBLY (17) and one THUMBSCREW (14) to the MAIN PAD
SUPPORT (3). See FIGURE 3.
• Insert one 2" SQ. END CAP (16) into the end of the tube on the MAIN PAD SUPPORT (3) as shown in FIGURE
3.
1/2
0
14
14
3
1/2
1/2
1
2
8
9
11 3/8 X 2-3/4"
1/2
1/2
3
4
5
16
4
1/2
5
6
Advertisement
