Who Should Read This Document; What Do You Need To Know - ND SatCom SKYWAN IDU 7000 Manual

Introduction
Manual Content
- Satellite Link and Outdoor Unit Design
To perform satellite communication over satellite links with sufficient quality the earth sta-
tions have to fulfill specific requirements concerning their transmission power and antenna
gain. A proper network design is based on an estimation of the link properties, taking into
account parameters of the satellite transponder and of the earth stations.
The ND Satcom Link Budget Tool which can be used to calculate satellite link power re-
quirements will be described in this section.The output will be an optimal selection of trans-
mitter and antenna types for each earth station.
®
- SkyWAN Data Networking Features
A detailed description of the SkyWAN
Frame Relay will be given. Implication for typical applications and services will be dis-
cussed.
Information for installation, line-up, network commissioning and system overview is covered in
®
the SkyWAN manuals suite; refer to chapter 1.5.
1.2.1

Who should read this document

This document is intended for engineers designing a SkyWAN
®
of a SkyWAN engineering training is recommended.
1.2.2

What do you need to know

It is expected that the user has general understanding how to design and engineer a VSAT net-
work. Before reading this document you should have a good understanding of the following:
- Understanding of satellite communication hardware and technology.
- Understanding of protocols e.g. IP, TCP, OSPF, SNMP, IGMP, PPP.
- Understanding of Frame Relay and Voice over IP (VoIP).
- Understanding of LAN and WAN architecture.
14
®
support of Data Networking Protocols TCP/IP and
Network Design and Engineering Guide
®
Satellite Network. Participation
2010-10-26