Epson SureColor S-Series Setup Manual page 30

| Adjusting the Take-up Reel
28
Load the roll core with the alignment tool onto the roll holder:
2.
Place the core on the right roll holder and press it in until part
•
Move the left roll holder over to hold the roll core in place, then turn the roll holder screw on the
•
left to lock it into place.
If you are installing the optional heavy roll media system, rotate the handle until part
•
gray part) is hidden after completing step 3.
From the front of the printer, move the alignment tool to the left side and feed it through the paper
3.
path.
is hidden.
A
(the light
A