Before First Use; Hob - Daily Use; Hob - Helpful Hints And Tips - Zanussi ZCV65020WA User Manual

Table of Contents

Advertisement

Available languages

Available languages

Accessories
• Oven shelf
For cookware, cake tins, roasts.
• Flat baking tray

Before first use

Warning! Refer to the Safety chapters.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Important! Refer to chapter "Care and
Cleaning".
Preheating
1. Set function
ture.

Hob - Daily use

Warning! Refer to the Safety chapters.
Heat settings
Control knob
Off position
Heat settings
1-9
(1 = lowest heat setting; 9=
highest heat setting)

Hob - Helpful hints and tips

Warning! Refer to the Safety chapters.
Cookware
• The bottom of the cookware must be
as thick and flat as possible.
• Cookware made of enamelled steel
and with aluminium or copper bottoms
can cause discoloration on glass ce-
ramic surface.
Energy saving
• If possible, always put the lids on the
cookware.
www.zanussi.com
and maximum tempera-
Function
For cakes and biscuits.
• Storage drawer
Below the oven cavity is the storage drawer.
2. Run an empty oven for 45 minutes.
3. Set function
ture.
4. Run an empty oven for 15 minutes.
This is to burn off any residue from the cavity
surface. Accessories can become more hot
than in normal use. During this period an
odour and smoke can be emitted. This is nor-
mal. Make sure the airflow is sufficient.
1. Turn the control knob to a necessary heat
setting.
2. To complete the cooking process, turn the
control knob to the
Residual heat indicator
The residual heat indicator comes on when a
cooking zone is hot.
Warning! Risk of burns from residual
heat!
• Put cookware on a cooking zone be-
fore you start it.
• Stop the cooking zones before the end
of the cooking time to use residual
heat.
• The bottom of pans and cooking zones
must have the same dimension.
Examples of cooking applications
The data in the table is for guidance only.
and maximum tempera-
position.
7

Advertisement

Chapters

Table of Contents
loading

Table of Contents