To add overlay data:
1. From the Sonar or DownScan page,
press MENu.
2. Select Overlay data and press ENTEr.
3. Select Configure and press ENTEr.
4. Press Menu and select Add. Press
ENTEr.
5. Select a data category and press ENTEr.
6. Select the desired data and press
ENTEr.
7. Repeat Steps 5 and 6 to add more data.
8. Press MENu and select Return to
Overlays. Press ENTEr.
9. Press MENu, select Done Configuring
and press ENTEr.
Customizing Overlay Data
You can add/remove data and adjust the size and
position of overlay data on the screen.
1. Press MENu and select Overlay data.
2. Select Configure and press ENTEr.
3. Highlight the desired overlay data and
press MENu.
4. S elect
the
category to make adjustments.
11
desired
configuration
Pages |
Elite-4x HDI