Task 1 - Configure Your Netgear - NETGEAR FVS124G Configuration Manual

Task 1 – Configure your NETGEAR
This section describes how to set up your NETGEAR's VPN. If you do not yet have VPN
configured and in use on your device, please proceed exactly as described in this section. We
will first be creating an IKE policy, which corresponds to "Phase 1" in VPN Tracker. In a second
step, we will be setting up an associated VPN (IPsec) policy, which corresponds to "Phase 2" in
VPN Tracker.
Advanced Users If you already have VPN in use on your device, you can use this chapter to verify your settings (refer
to the chapter "VPN Settings Explained" for more detailed information about the settings available on
your NETGEAR). If you have multiple VPN policies set up on the device, you will have to ensure that
there are no unintended side-effects. Please read the chapter "Supporting Multiple Users" to learn
how to set up multiple tunnels without them interfering with each other.
Step 1 – Create a new IKE policy
Note Make sure you have a current backup of your NETGEAR's configuration before making any changes.
‣ Go to VPN > IKE Policies
‣ Click "Add"
9