Step 2 - Configure The Vpn Connection - NETGEAR FVS124G Configuration Manual

Step 2 – Configure the VPN Connection
(*) How to build the Local Identifier:
vpntracker1.vpntracker.local
➍
➏
➐
➑ + ➋
➌
‣ VPN Gateway: Enter your NETGEAR's public IP
address ➍. If you are using Dynamic DNS, or if the
device has a DNS host name, use it instead (in our
example, we are using the host name
"vpn.example.com")
‣ Local Address: Leave empty for now.
your setup, you may have to set a specific Local
Address eventually. Refer to "Supporting Multiple
Users" for details
‣ Remote Networks: Enter the network address
and the subnet mask
accessed through the VPN tunnel Separate the
subnet mask with a forward slash ("/")
‣ Identifiers
‣ Make sure the types for both identifiers are set to
"Fully Qualified Domain Name (FQDN)"
‣ Local: The local identifier consists of the
NETGEAR's VPN policy name ➑, a number
between 1 and 10 (different for each user of this
connection), and the NETGEAR's remote identifier
➌ (see the diagram on the left). In our example, the
local identifier is "vpntracker1.vpntracker.local"
‣ Remote: Enter the local identifier from your
NETGEAR (e.g. "netgear.local")
15
. Depending on
➐
➏
of the network that is being
➋