Teletext - Toshiba 24PS10E Owner's Manual

2
Press v or w to adjust the settings as
required.

Teletext

This TV has a multi-page Teletext memory, which
takes a few moments to load and it offers two
ways of viewing Teletext Auto and List which
are explained below.
Setting up the Teletext mode
To select a language for Teletext:
The language 1-4 option enables the display of
different language when using Teletext.
1
From the FUNCTION menu, and then press
s or r to select Teletext Language.
2
Press v or w to select the required language.
• Language 1: English, German, Dutch,
Flemish, Russian, Bulgarian, Ukranian,
Lettish, Lithuanian, Czech, Slovak,
Estonian
• Language 2: Polish, German, Dutch,
Flemish, Estonian, Lettish, Lithuanian,
French, Serbian, Croatian, Slovenian,
Czech, Slovak, Rumanian
• Language 3: English, French, Hebrew,
Turkish, Arabic
• Language 4: English, French, Hebrew,
Turkish, Farsi (Iranian/Persian)
To select Teletext mode:
Select a channel position with the desired
Teletext service.
1
From FUNCTION menu, press s or r to
select Teletext.
2
Press v or w to select Auto or List mode.
Note:
When you are watching the teletext programme,
SETUP menu and FUNCTION menu are not
selectable.
Teletext general information
button:
Pressing once will bring up the teletext
screen. Press again to superimpose the teletext
over a normal broadcast picture. Press again to
return to normal TV mode. You need to return to
normal viewing if you wish to change channels.
When you first press
service, the first page you see will be the initial
page.
Using the TV's features
to access the text
In Auto mode, this displays the main subjects
available and their relevant page numbers.
In List mode, you will see the page numbers
currently stored on the each colour button.
Note:
If you press while the Picture Mode is
activated, this mode will be cancelled.
Sub-pages:
Once in this chosen page, if there are sub-pages
they will automatically load into memory without
changing the one you are reading. If there are
many sub-pages, it will take a long time for them
all to load and this will depend on the speed with
which the broadcaster transmits them.
To access the sub-pages in memory, press v
or w to view them.
Using Subtitles
1
Press on the remote control to display
the current Subtitle status. While this status is
displayed, press again to change the setting.
Note:
If Subtitle is On, the TV will always display
subtitles whenever such information is available
for the channel you are viewing.
Using Auto mode
There are two Modes: Auto will display
FASTEXT, if available. List will display your four
favorite pages. In either mode, as an alternative
to the coloured buttons, you can access a page
by entering a 3-digit number, using the Number
buttons on the remote control, or to advance
to the next page, press PU, to go back to the
previous page press Pu. To change between
Auto and List, see above.
• Press to access teletext.
100 Spor t
Football Baseball
Green
Red
If FASTEXT is available, you will see 4 coloured
titles at the base of the TV screen. To access any
given subject, simply press the relevant coloured
button on the remote control.
If FASTEXT is not available, you can access any
page simply by entering a 3-digit page number or
pressing the corresponding coloured button.
14:57:55
Racing Swimming
Blue
Yellow
21