Vibration Isolators
Vibration isolators are recommended for all roof mounted installa-
tions or wherever vibration transmission is a consideration.
2 lists spring isolators for all ALP unit sizes.
isolator locations in relation to the unit control center.
gives dimensions that are required to secure each McQuay isolator
selection to the mounting surface.
Table 3 shows the isolator loads at each location shown in Figure 4
and the maximum loads for each McQuay selection.
TABLE 2
TABLE 3
VIBRATION ISOLATORS
216404B-27
IS0 LATOR LOADS
Table
Figure 4 shows
Figure 5
page 7