Summary of Contents for Northwestern Bell Excursion 39202
Page 1
39202 ® Congratulations on your selection of the Excursion 39202 from Northwestern Bell Phones. This quality cordless telephone, like ® all Genuine BELL products, has been designed to give you many years of continuous service and represents the best value 05278B-2 OWNER’S MANUAL # 39202 ver.
for your money. It requires little maintenance and is easy to setup and operate. IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action.
• Warranty Card • Accessory Order Form SAVE THESE INSTUCTIONS This product should be operated only from the type of power source indicated on the marking label. If IMPORTANT SAFETY you are not sure of the type of INSTRUCTIONS power supply to your home, consult When using your telephone equipment, your dealer or local power company.
operating instructions. Adjust polish, solvents, abrasives or strong only those controls that are detergents since these can damage covered by the operating the finish. instructions. Improper Your phone should be situated away adjustments of other controls from heat sources such as radiators, may result in damage and will heaters, stoves or any other often require extensive work...
Privacy of communications may not be insured when using this phone. Changes or modifications not expressly approved in writing by Northwestern Bell Phones may void the user’s authority to operate this equipment.
® EXCURSION 39202 CONTROLS DIAGRAM Handset Antenna IN USE LED Retainer Tab Indicator Receiver IN USE LED CH (Channel) Indicator Handset Button Retainer Slot CHARGE LED FLASH Button Indicator TALK Button MUTE Button PAGE Button Headphone Jack TONE Button RE/PA (Redial/Pause ) Button MEMORY Button...
disable the ringer on the handset and DESCRIPTIONS activate the battery saving function. Set HANDSET CONTROLS: on STANDBY for normal use, and SAVE Belt Retainer Clip - For added ON for battery saving function. convenience, a handset belt clip is TALK button - Press this button to place included for portabilty.
PRE-INSTALLATION Telephone Modular NOTES Wall Jack Studs • Ensure that the rechargeable Ni-Cad battery pack is installed inside the handset battery compartment. • Set the STANDBY/SAVE ON switch on the handset to the STANDBY position for normal use. • It is strongly recommended that the Ni-Cad battery be fully charged for at least 12 hours before initial use.
the handset to hang onto the base unit, call using the headset. Refer to the as shown in figure 3. manufacture’s headset manual for more details. Headset Jack Headset Plug (2.5mm) Handset Retainer Tab Base (Figure 3) Belt Clip Instructions (Figure 5) Wipe clean the back of the handset where the belt clip is to be applied.
• If you have a pulse(rotary) dialing lifted from the base unit, the handset service, set the Tone / Pulse (T/P) will automatically answer the call switch to Pulse (P) position. without the TALK button being Mixed Dialing (Temporary Tone Dialing pressed.
• Channel Scan (Manual Scan) The new phone number will If the existing channel becomes noisy or automatically replace the previous starts having interference, press the one. Channel (CH) button on the handset. ® The Excursion 39202 will automatically Pause Function scan for the best channel available.
could affect the operation of your 1 Million Combination Security system. ® The Excursion 39202 uses a digital coding security system to prevent unauthorized use of your telephone line Noise by other cordless phones nearby. The Electric pulse noise is present in most ®...
• ® Keep the Excursion 39202 base unit Make sure the AC adaptor and away from electrical equipment. telephone line cord is connected to ® Radio Frequency Interference (RFI) the Excursion 39202. is sometimes generated by these Place the handset on the base appliances, which can cause a cradle.
Page 15
FLASH button will momentarily hang up the phone to access these services. Hearing Aid Compatible – Allows Ringer Equivalence Number (REN) - hearing aid devices to function properly This is a number located underneath the while using the handset. base of your phone(s) or phone-related device.
TROUBLESHOOTING SYMPTOM SOLUTION • No dial tone Check to see if the Ni-Cad battery is properly connected inside the handset battery compartment. • Make sure that the adaptor plug is connected to the base unit. • Check for the telephone line cord connections. Ensure that both connectors are plugged securely on the jacks.
Page 17
• Memory feature Make sure that the unit is in the standby (hung up) before does not work storing a phone number. • The maximum number of digits that you can store for each memory location is 22 digits. See the “Memory Dialing” section for more details.
Need help?
Do you have a question about the Excursion 39202 and is the answer not in the manual?
Questions and answers