Konica Minolta BIZHUB 750 Service Manual page 28

1. SYSTEM CONFIGURATION
B. Configuration for optional device connection
NOTE
• For machines equipped with ZU-601/602, the function of PK-502/503/504/505 is not available
when PI-501 is not equipped.
• Any combination other than those listed below is not available.
No.
1
2
3 FS-504/FS-602
4 FS-504/FS-602
5 FS-504/FS-602
6 ZU-601/ZU-602
7 ZU-601/ZU-602
8 ZU-601 *2
9 ZU-602 *2
*1 Paper fed from PI-501 cannot be punched.
*2 Paper fed from PI-501 is punched by PK-502/503/504/505. And paper fed from those other than PI-501
is punched by ZU-601/602.
2
Combinations of finishing
FS-504/FS-602
SF-601
PI-501
PK-502/PK-503/PK-504/PK-505
PI-501 PK-502/PK-503/PK-504/PK-505
FS-504/FS-602
FS-504/FS-602
FS-504/FS-602 PI-501
FS-504/FS-602 PI-501
Theory of Operation Ver1.0 Aug.2005
AC power to be connected to
External (ZU-601/ZU-602)
PI-501 *1 External (ZU-601/ZU-602)
PK-504 *2
PK-502/PK-503/
PK-505 *2
External (ZU-601)
External (ZU-602)