Connecting An Hdmi Or A Dvi Device To The Hdmi Input; Connection To Other Equipment - JVC LT-24HA48E Operating Instructions Manual

Connecting an HDMI or a DVI device to the HDMI input

The HDMI input receives digital audio and uncompressed video from a HDMI equipped device or
uncompressed digital video from a DVI equipped device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video
signal, so it is necessary to connect the external speaker units to output the audio signals.
Select the HDMI input mode (see P.11).
Note:
• Please notice the operating manual for the HDMI device to be set up.
• This unit cannot support PC signal from HDMI input.

Connection to other equipment

Attention: Preparation:
• Disconnect all equipment from the AC-supply, to prevent any possible damage.
• Make the necessary connections.
• Make sure all connections are safe & secure before reconnecting your equipment the AC-supply.
Note:
• Select an appropriate external input mode. (See page 11).
1. Connecting a Video camera or Games console to AV
• Connect Video (Yellow) cable from devices to supplied Mini-pin cable
(Green connector). Then connect to the unit.
2. Connecting an digital audio system
Connect Digital-amplifier to the Digital-Audio-output of the TV-unit with a coaxial digital cable.
LT-29HA48E/
LT-39HG48E
(Back view)
EN 26
External speaker units
TV (Rear/Side view)
LT-29HA48E/
LT-39HG48E
(Back view)
(Back view)
To AUDIO input
Audio cable (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
HDMI cable (type A connector)
To HDMI input
(Side view)
Mini-pin cable (supplied)
Red
Blue
(Back view)
Green
Audio digital cable
(not supplied)
To AUDIO output
or
(not supplied)
(not supplied)
Yellow
AV output
White
Red
(AV cable, not supplied)
Surround sound amplifier
system
DVI device
To DVI output
HDMI device
To HDMI output
Video camera
(example)