JVC LT-24HA48E Operating Instructions Manual page 19

Other convenience functions
Selected Items
Setup
OSD Language
Aspect Ratio
Blue Screen
On / Off
Time Setup
Time Zone
Time
Sleep Timer
Auto Sleep
OSD Timer
Subtitle
Subtitle
Digital Subtitle Lang. 1st
Digital Subtitle Lang. 2nd
Subtitle Type
Teletext
Digital Teletext Language
Decoding Page Language
Audio Language
Audio Language 1st
Audio Language 2nd
Common Interface
Disk Setup
Format Disk
First Time Installation
Reset Default
Lock
See page 12.
See page 21.
You can set the TV to automatically change to a blue
screen and mute the sound if the signal is weak or
absent.
If the time displayed on the Channel Information differs
from the actual time, adjust the time offset until the
correct time zone is shown.
•
See page 13.
Sleep timer switches the TV to standby after a defined
period of time.
Off / 10 / 20 / 30 / 40
To cancel the Sleep Timer, set to "Off".
/ 50 / 60 / 90 / 120
Minutes
When the Set and Remote button operation are not
operated with specified period by this setting (3/4/5
Off / 3 / 4 / 5 Hours
Hours), the power status is changed to stand by mode
automatically
The OSD is cleared automatically as per this setting.
None / 5 / 10 / 15 / 30 /
45 /60 S
On /Off Select subtitle On or Off.
Select preferred subtitle language, if the current
watching DVB channel has more than one subtitle
language.
Select second preferred subtitle language.
Select the subtitle type (Normal / Hearing Impaired).
First preferred Videotext language can be set here,
which is used in case that the currently viewed DVB
channel has more than one Videotext Languages.
If the channel does not have the Videotext language set
in "Digital Teletext Language", the Videotext language is
displayed with first receiving language.
Set language for the decoding page.
Select preferred audio language, if the current watching
DVB channel has more than one audio language.
Select second preferred audio language, if the current
watching DVB channel does not have the language
set in "Audio Language 1st" option above. If the "Audio
Language 2nd" set here is not transmitted in the
channel, the first language included in the channel is
selected.
You can access the Common Interface module
information from this menu option.
•
See page 22.
You can format the USB devices.
See page 11.
Press ▶ or ENTER to enter the Reset Default screen.
Press ◀ to select "OK", then press ENTER. Reset the
TV function will now begin.
See page 17.
Setup hint
Normally, this would be done by selecting "As
Broadcaster".
This unit supports the C.I. card of "Top Up TV" and
"Boxer"
19 EN