Time Shift; Epg Recording - JVC LT-24HA48E Operating Instructions Manual

Time Shift

You can record a digital programme by using
the USB storage device. This function is for
your convenience, and allows you to pause/
record a live programme for a period of time
based on the size of the USB drive inserted.
Preparation:
Plug-in an external storage device into USB port.
1
To start recording, press ▶ (PLAY) button.
The recording will start and the picture will be
paused.
2
To view a recorded programme, press ▶ (PLAY)
button again.
3
To stop recording, press ■ (STOP) during
viewing a recorded programme, the pop-up
will appear select "YES" then press ENTER to
confirm stop recording.

EPG Recording

Preparation:
Plug-in an external storage device into USB port.
1
Press GUIDE (EPG) to enter EPG Menu
Screen press ▲ or ▼ to select the programme
which you want to record, then press Blue
button to enter the Schedule List page.
Note:
You can also enter the Schedule List page
by press T-REC then press Blue.
Schedule List
Channel number
Antenna 4Music All New! Katy P
Start date
Start time
Stop time
Schedule type
Repeat type
2
Press ▲/▼/◀/▶ to select desired option, then
press number buttons (0-9) to set date and
time.
Channel number: Press ◀ or ▶ to select channel
number, and it will show the channel information
below.
Start date: Set the start date of record / reminder.
Start time: Set the start time of record / reminder.
Stop time: Set the stop time of record.
Schedule type: Select the schedule type (Record /
Reminder).
Repeat type: Select the repeat type (Once / Daily /
Week).
18:11:25
CH1
2013/11/12
18:00
19:00
Record
Once
Add Cancel
3
Make sure the start time is later than the current
time, then select "Add" and enter the schedule
record list page.
In the schedule record list page, you can add
more schedule by press Blue button, or delete
the schedule you had selected by press Red
button.
4
When the time is up, you will see the reminder
dialog box. Select "YES" to record. Or, no
answer about 30 seconds, recording will start.
Note:
• Schedule List page also can be displayed by
select "Schedule List" in "TV" menu.
• When the TV is in standby mode, and the time to
start record, TV will record the programme with
no power-on. You can check TV status by power
indicator on the front of TV (while recording the
programme, the indicator will flash red and green
alternately).
23 EN