Printing - Symmetricom 5120A Operation And Maintenance Manual

6.2 Printing

When the Print button on the front panel is pressed, the test set prints the visible plot or table to
the current print job destination. See
information about the print destinations and formats.
To print data:
1. Navigate to the data set to be printed (see
2. Use one of the following methods:
Press Print on the front panel.
Right-click the current plot or table and select Control > Print from the menu.
To cancel pending print jobs:
1. Access the Settings page (see
2. Press Printing.
3. Press the down arrow softkey until Cancel Print Jobs button is highlighted.
The softkey interface displays a PUSH softkey.
4. Press PUSH to push the Cancel Print Jobs button.
5. Press Return to return to the previous screens.
5120A/5115A Operations and Maintenance Manual
"4.1.3 Printer Configuration"
Note
The test set can queue up to 15 print jobs. All print jobs will go to the currently
selected printer (or file system). The number of pending print jobs is displayed in
the top left corner of screen.
"4.1 The Settings Screen"
on page 26 for more
"3.1.1 Navigation" on page 12).
on page 21 for details).
55