Programming Examples - Haas+Sohn HRT 160 Operator's And Service Manual

Example #1
We want to index the platter 90 degrees (90
1. Turn [POWER] switch on. (The power switch is located on the rear panel.)
2. Push the [CYCLE START] switch.
3. Push the [ZERO RETURN] switch.
4. Push the [MODE] button and release. Displays must be blinking.
5. Push and hold [CLR] button for five seconds. "01 000.000" displayed.
6. Enter [9 0 0 0 0]
7. Push [MODE] button. Steady displays.
8. Push [CYCLE START] to index.
36

5. PROGRAMMING EXAMPLES

o ).
96-5047 rev L June 2005